NEEWER® Wireless IR Shutter Release Remote for Olympus Stylus & MORE!

*S button for Shutter
*+ and - for next or previous picutre (in the play mode)
*W and T for Zoom change. (Zoom function does not work in E system)
*Bulb mode supported for most Olympus D-SLRs (by using W and T buttons)

compatible with:
Olympus: E1 E3 E10 E20 E100RS E300 E330
E-400 E-410 E-420 E-450 E-500 E-510 E-520 E-600 E-620 E-30
E2100 E2500
Stylus 800, Stylus 500, Stylus 410, Stylus 400, Stylus 300, D40 Zoom, C8080, C770 C755, C750, C730, C7070, C7000, C60, C5060, C5050, C5000, C50, C4040, C3040, C3030, C3000, C2500L, C2100, C2040, C2020 C2000, 800 Digital, 500 Digital, 410 Digital, 400 Digital, 300 Digital

Note: your model may not include in the above list. Please check the manual of you camera to see whether it is compatible with a RM-1 IR remote controller.

How to use:

1.For the first time use. please pull out the plastic separator at the battery holder.

2.Mount the camera on a tripod or place the camera on a stable, level surface.

3.Press the button and rotate main command dial until (delayed remote) or (quick response remote) is displayed in the control panel.

4.Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors, make sure that the subject is not backlit and that the line of site between the transmitter and the infrared receiver is not blocked by the lens or other obstacles).

5.How the camera focuses and shoots depends on the option selected camera's custom setting. For further information, check your camera's manual.

6.Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.

Package Contents
Remote control
Battery(pre-installed)
manual